Metallic & Flake Designer Floors in Louisiana

Two Ways to Build a Designer Floor

Decorative floors are not one product — they are two very different looks built from different materials. Both start with prepped, ground concrete and both finish with a clear protective coat, but what happens in the middle is where the personality comes from. Understanding the difference is the first step to picking the right one for your space.

A flake (or chip) broadcast system uses colored vinyl flakes hand-broadcast into a wet basecoat. As the flakes land and lock in, they build a textured, multi-tone, granite-like surface. A metallic epoxy system instead suspends reflective metallic pigments in a clear resin, then the installer moves and swirls that resin to create a glossy, three-dimensional marble, lava, or ocean effect that seems to have depth you can look into.

• Flake / chip broadcast — vinyl color flakes for a granite-like, textured finish that hides imperfections and grips underfoot
• Metallic epoxy — reflective pigments swirled into resin for a high-gloss, 3D marble or lava look with real visual depth
• Shared finish — both are locked in and protected under a UV-stable polyaspartic clear topcoat that carries the wear

Flake Broadcast: The Granite Look That Hides Everything

Flake floors are the workhorse of the designer category, and for good reason. The vinyl chips come in dozens of blends and multiple sizes, so we can dial in anything from a subtle salt-and-pepper to a bold, high-contrast granite. Because the surface is built from thousands of individual flakes, it naturally camouflages minor slab imperfections, patches, and the small dings a floor picks up over years of real use.

That flake texture does double duty. It looks great, and it creates a subtle profile that boosts slip resistance — a big deal on a garage apron, an entryway, or anywhere water and shoes meet. You can push that grip further with a heavier flake broadcast or an added anti-slip aggregate in the topcoat, which is exactly why flake is our go-to for patio and pool deck coating where footing matters most.

Metallic Epoxy: Showroom Gloss With Real Depth

Metallic is the showstopper. Instead of texture, it delivers a mirror-smooth, high-gloss surface with swirling color that reads as three-dimensional — like polished marble, molten lava, or a rolling ocean frozen mid-motion. No two metallic floors are ever identical, because the pattern is created by hand as the installer works the reflective pigments while the resin is still moving.

That hand-crafted quality is the appeal and the reason metallic sits a step above standard flake on price. It rewards a controlled indoor environment: showrooms, retail floors, man-caves, basements, entryways, and restaurant dining rooms where the lighting can play off that gloss. Because the finish is so reflective and smooth, metallic is best kept indoors or under cover — for wide-open outdoor spaces, flake is the better and more slip-safe pick.

Every metallic floor we install is sealed with the same UV-stable polyaspartic clear that goes over our solid systems, so the gloss you see on day one is the gloss you keep. That topcoat is what turns a beautiful-but-soft art surface into a floor you can actually live and work on.

Design Freedom: Make It Yours

Both systems are built to be customized. With flake we can adjust the color blend, flake size, and broadcast density — full-broadcast for maximum texture and a fully filled surface, or a lighter accent scatter over a colored base. We can lay in borders, define zones, and set a clean transition line where the floor meets a wall or a bay.

Metallic opens the door to custom color combinations and swirl patterns, and both systems can incorporate inlaid logos — a shop name, a team mark, a brand emblem set right into the floor and sealed under the clear coat so it never wears off. The result in either case is a showroom-quality high-gloss finish that looks custom because it is.

• Custom color blends — matched to your brand, your cabinets, or your vibe
• Flake size and density — subtle and smooth to bold and heavily textured
• Borders and zones — defined edges, walkways, and bay lines
• Inlaid logos and emblems — sealed permanently under the topcoat

Flake vs Metallic: A Side-by-Side Look

There is no wrong answer here — only the right fit for your space, your slab, and your budget. This table lays out how the two systems compare on the factors that usually decide it.

Short version: pick flake when you want durability, grip, forgiveness, and indoor-or-outdoor flexibility. Pick metallic when you want a jaw-dropping indoor centerpiece and you have the slab and the budget to show it off.

Built for Louisiana Heat, Sun, and Humidity

A pretty floor that fades or stains in a Louisiana summer is a waste of money. That is why every designer floor we install is finished with the same UV-stable polyaspartic topcoat as our solid systems. It will not amber or yellow in strong sun the way a bare epoxy clear can, so a bright metallic swirl or a crisp white flake blend stays true instead of turning dingy.

The coating also creates a non-porous, sealed surface — and that matters more here than almost anywhere. Bare concrete drinks up moisture and feeds the mildew and humidity staining that plagues Louisiana slabs. A sealed designer floor gives that moisture nothing to grab, so it wipes clean and resists the dingy discoloration that ruins uncoated concrete. Keep metallic indoors or covered and run flake anywhere; both shrug off the climate.

The takeaway: you are not trading toughness for looks. A designer floor with a polyaspartic clear is just as hard, chemical-resistant, and easy to clean as a solid-color system — the beauty is a bonus layered on top of real performance. See how the finish system works on our polyaspartic 1-day systems page.

Choosing Your Look, Your Cost, and Your Warranty

Picking a color is easier than it sounds. We start with the room — the light it gets, the wall and cabinet colors, and how you use the space — then narrow to a few blends and show you real samples in your own lighting, because a flake or metallic blend reads very differently under garage LEDs than on a screen. Darker blends hide dust and tire marks; lighter ones brighten a space and make it feel bigger.

On cost, a flake system lands in the standard designer range, while metallic runs a step up for the extra material and the hand-applied artistry. Every project is priced on your square footage, your slab condition, and the design you choose — so the honest answer is that a quick measure and a look at your concrete gives you a real number. Both systems are the same high-end builds we put on a garage floor coating, just dressed up.

Every designer floor is backed by a written warranty on adhesion and performance, because a floor built on properly ground and prepped concrete simply does not peel. Ready to see your options? Grab a free quote below or call 844-967-5247, and we will walk your space, talk design, and give you a firm number.